
10° Transom, Shallow-V Aft
A sharp forward entry knocks down chop while the shallow-V aft and 10° transom promote quick planing, low cruise speeds and rock-solid stability while trolling, drifting or at rest.

A 19-foot New England-built center console — big enough to chase hard tails offshore, light enough to float the skinniest coves, and tough enough to need almost zero maintenance.
The NorthCoast 190 sets the standard for all-around versatile use. Big enough to go deep for hard tails, drop some eels for a few big ones off a nearby ledge, wreck or shoal — small enough to float in the shallowest coves. A solid fiberglass hull, foam-cored deck and foam-filled fiberglass grid stringer system combine to create a lightweight, incredibly tough and durable composite structure. No wood. Designed for the serious coastal angler to be efficient, fast, smooth riding and virtually maintenance free.

Rugged. Versatile.
Built In New England.

This Model Is Equipped With
An all-composite "no wood" hull with foam-filled stringer grid, high-density foam-cored transom and positive flotation — a rugged, fishable 19-footer that runs the inshore skinny just as comfortably as it crosses a ledge for hard tails, backed by a 12-year structural hull warranty.
05 Advantages
A solid fiberglass hull, foam-cored deck, molded hull liner, foam-filled composite grid stringer system and high-density foam-cored transom mean nothing in the structure can ever rot — backed by a 12-year structural hull warranty.
A sharp entry splits any chop while a shallow-V aft and 10° transom promote easy planing and a stable platform whether you're trolling, drifting or sitting at rest on the anchor.
Big enough to drop eels off a ledge for stripers or run out to a nearby wreck for hard tails, small enough to float the shallowest coves — one boat that genuinely covers the whole coast.
Rig with a Yamaha 115 for efficient inshore work or step up to the 150XSA2 White for the full top-end on longer offshore runs — clean, modern, low-maintenance four-stroke power.
A self-bailing cockpit, FRP leaning post with tackle drawers, four stainless rod holders, rod storage under both gunwales, salt-water washdown and a telescoping swim ladder make the 190 ready to fish straight off the trailer.
01 / 05

A sharp forward entry knocks down chop while the shallow-V aft and 10° transom promote quick planing, low cruise speeds and rock-solid stability while trolling, drifting or at rest.

Hang a Yamaha 115 for fuel-sipping inshore days or step up to the 150XSA2 White for the full top-end — clean four-stroke power matched to a hull that planes with minimal effort.

Comes standard with a mechanical steering system and EDSON stainless wheel — optional hydraulic steering is available on 140 and 150 HP rigs for effortless control at every speed.

A lightweight, incredibly tough all-composite structure means efficient cruise speeds, an easy tow and a boat that gets up and over the moment you put the throttle down.
02 / 05

A foam-cored deck and molded hull liner with two-tone diamond non-skid in your choice of White, Tan or Light Grey delivers sure footing, easy cleanup and zero rot for the life of the boat.

A fully self-bailing cockpit with two scuppers, stainless thru-hulls and an automatic bilge pump keeps the deck dry on the worst fishing days — wash it down and move on.

Stainless 8" bow and stern cleats, 3" bow chocks, ½" bow and stern eyes, fuel-fill deck plate and latches stand up to salt year after year with no maintenance fuss.

A high-density foam-cored composite transom and positive flotation built into the hull keep the boat safe, stiff and quiet underway — and rot-free for the life of the boat.
03 / 05

A console windshield and full wrap-around stainless handrail keep helmsman and passengers protected from spray and steady on their feet in any sea state.

A cushioned forward-facing console seat with dry storage below gives a guest the best ride on the boat — and a clean place to stow lifejackets, foulies and tackle.

An EDSON stainless steering wheel and a Ritchie compass round out a no-nonsense helm built to last — with a 6-gang DC electrical panel for clean accessory wiring.

A center-console layout with low-profile console keeps sightlines open in every direction — easier to spot birds working, easier to read structure, easier to fish.
04 / 05

A fiberglass leaning post with built-in tackle drawers and a backrest gives the captain a comfortable place to drive and the crew organized storage for every rig.

Four flush-mount stainless rod holders come standard, with optional pairs available — set a spread for stripers, deploy a trolling pattern, or rack up for the ride home.

Rod storage built into both port and starboard gunwales keeps spinning and conventional setups out of the way and protected from boot traffic in the cockpit.

A saltwater washdown system rinses blood and bait out of the cockpit, and a telescoping stainless swim ladder and platform make boarding from the water easy.
05 / 05

Step up to Yamaha's 150XSA2 White outboard for the full top-end on the 190 hull — a clean look matched to the white gelcoat and the power to chase fish further offshore.

Add rocket launchers across the leaning post backrest to carry trolling rods, jigging sticks or fly rods up and out of the way of working anglers in the cockpit.

Optional pop-up cleats keep the deck snag-free when you're fishing and rise instantly when it's time to tie up — a clean upgrade for serious anglers.

An optional Wet Sounds radio with two 6" speakers brings serious marine-grade audio to the 190 — built to handle salt, sun and the wind blowing over the gunwales.

Order your 190 in a factory hull color from NorthCoast's standard palette to set your boat apart at the slip, at the ramp and on the water.
Get in Touch
Interested in the 190 CC? Send us a message and our team will reach out with details, pricing, and availability.